#What is project magenta software
Here is the first ever test pictures showing the monitors with PM software running.Now I understand how gratifying it is to see these pics and what every other builder must have gone through. Also, I have cut slots into the CDU bay stand walls to support the monitors on either side in addition to the installed brackets. I have simply installed few wooden brackets to hold the monitors. I found this technique simple and effective for LCD monitors. This way, MIP panel simply rests on the mip base and montor drops down to correct height. Instead, I have cut holes in the MIP base to drop the monitors down. I have seen many builders building the base to rest the monitors. Notice, a different approach to installing the monitors. I have also built the MIP stand out of 1/2" thick MDF/plywood. That allows easy folding of the carpet around it. Notice the overhang all around the platform in this picture. These dimensions are carefully chosen since I simply use two 4'x8' baseboards ripped length wise into two pieces of 30" and 18" wide and 8' long which is also easy to transport in a van. So, looking at the picture above, the first section (on which the MIP rests) is 30" wide, the next one is 18" (yokes bay), next is 30" and the last is 18" again. Further, I have horizontally divided it into 4 sections with alternating widths of 30" and 18" respectively. Hence the outside dimensions of the base itself as you see in the top picture is 93"x93". I wanted top base board to overhangs 1.5" all around over the base structure. Platform with the top board installed is a 8'x8' square constructed out of the standard 2"x10"x 8' wood. Here are a few pictures of the base platform. But they are insanely expensive however I now realize how hard to build anything and probably that's why they are so expensive. At times, I was tempted to go out and purchase a dual seat trainers. Considering the fact that I am not good at construction work, I struggled a lot with this part of the project. Progress has been very slow considering I only get to work on weekends only and that too not on all weekends. I have been working hard on building the Platform and the MIP stand for the last couple of weeks.
0 kommentar(er)
